1000A AC/DC True RMS Digital Clamp Meter
SKU
BDACM1000
Product Details
- Simple meter with current clamp for essential electrical tasks such as measuring AC/DC voltage or current, frequency, resistance, capacitance, continuity, polarity and temperature.
- 45mm jaw opening for measuring current without opening the electrical circuit.
- True RMS measurement <1KHz.
- Voltage up to 1000V DC and AC (CAT II)
- Backlit 1.8" LCD screen for accurate reading
- Measurement ranges:
- o Voltage:
- - DCV: 400.0mV/4.000V/40.00V/400.0V/1000V
- 0.5% + 5 counts
- - ACV: 4.000V/40.00V/400.0V/1000V
- 1% + 5 counts
- o Current:
- - DCA: 400.0A/1000A
- 2.5% + 6 counts
- - ACA: 400.0A/1000A
- 3.0% + 8 counts
- o Resistance: 400.0Ω/4.000KΩ/40.00KΩ/400.0KΩ/4.000MΩ/40.00MΩ
- 0.5% + 3 counts
- o Capacitance: 4.000nF/40.00nF/400.0nF/4.000uF/40.00uF/400.0uF/4.000mF
- 3% + 15 counts
- o Continuity: 200Ω < 50Ω beep
- o Diode test: 2V
- o Frequency: 4.000Hz/40.00Hz/400.0Hz/4.000KHz/40.00KHz/400.0KHz/4.000MHz
- 0.1% + 5 counts
- o Temperature: -200 ~ 1200°C
- o Non contact voltage sensing: > 50VAC 50/60Hz
- Polarity indication.
- Auto/manual range.
- Overrange indication: "OL" display.
- Data hold mode.
- Max/Min function.
- Relative value function: Yes.
- Auto Power Off function.
- Low battery indication.
- Battery: 3 x AAA 1.5V
- Temperature range: Operating: 0 ~ 40°C / Storage: -10 ~ 60°C
- Set includes
- o Alligator clip test probe leads, spring-loaded copper clips with wide 12.7 mm (0.5 inch) jaw opening and serrated teeth, 1m long.
- o Needle probe set with silicone leads 1m long.
- o Temperature sensor probe lead 1m long.
- o Quick guide
- o Calibration report
- o Bag with strap holder
- CAT category: CAT II 1000V - CAT III 600V
- LVD: EN 61010-1
- EN 61010-2-030
- EN 61010-031
- EN 61010-2-032
- EN 61010-2-033
- EMC: EN 61326-1
Documents
Technical Details
Download PDF